Table of Contents
Advertisement
Regular cleaning produces clean and delicious ice.
Regular cleaning prevents water stains, molding, etc.
To clean (rinse) the ice tray
Cleaning the ice tray using water from
the water tank
Remove ice from the ice storage bin and
close the ice making compartment door.
Remove ice
Fill the water tank with water
and set it in place.
Press
on the control panel and
hold for about 5 seconds
(Until the buzzer emits "peep, peep" tone.).
The display (
of the ice making compartment will blink
(for
about 1 minute
(The ice tray will be cleaned by the water from
the water tank.)
Repeat step
Remove the ice storage bin and
discard the water and ice.
Do not discard the two-layer soundproof mat.
Ice storage bin
,
,
, or
)
).
2 to 3 times.
When the automatic ice maker will
not be used for a long period of time
When using the
*Follow these instructions for transportation of the refrigerator as well.
Discard all the ice and water from the ice tray
in the ice storage bin to empty the ice tray.
Remove the water tank and close
the ice making compartment door.
Ice making
compartment
Press
on the control panel and
hold for about 5 seconds
(Until the buzzer emits "peep, peep" tone.).
The display (
of the ice making compartment will blink
(for
about 1 minute
(The water and ice will empty from the ice tray.)
After the blinking stops, the original display will return.
Remove the ice storage bin and
discard the water and ice.
Do not discard the two-layer soundproof mat.
Ice storage bin
Set the ice making compartment
to
.
Wash the water tank (water pump, pipe, and
light-type bacteria removing filter), water supply
pipe, ice storage bin, and soundproof mat with
water. Dry carefully and reinstall parts.
To restart the ice maker, switch the ice making
11
setting.
page
setting
Water tank
,
,
, or
)
).
11
page
Put the water tank back
to its original position.
23
Hide quick links:
Advertisement
Table of Contents
