Mitsubishi Electric MR-G57N Operating Instructions Manual page 11

Setting the
Ice Making Compartment
Ice making
Display the ice making
compartment
* The above illustration is an example.
Settings may be different according to the selected mode.
Press
required ice maker setting blink.
The display will change at each press.
Ice making mode can be selected from 4 types.
Select this mode when you want
(Regular ice making)
to make a large quantity of ice.
Select this mode when you want
(Quick ice making)
to make ice quickly.
Select this mode when you want
(Crystal ice making)
to make crystal clear ice.
It will take more time compared to
"REG" mode (about 5 to 8 hours).
Select this mode when you do
(Stop ice making)
not use ice such in winter
time.
The compartment can be used for frozen
food storage. Before using this compartment
as a freezer, clean the water supply system.
Short notes for users:
During "QCK" mode, the noise from the refrigerator will
become higher due to high speed cooling.
The ice making time differs according to the ambient
temperature and conditions of usage.
Immediately after installation, it may take more than 24 hours
to make ice even if "QCK" mode is selected.
Setting at the time of installation
(purchase)
Ice Making
Selecting ice
making modes
repeatedly to make your
23
page
Short notes for users:
The display will turn off after 30
seconds if no button is pressed.
The display will come on if any button
is pressed.
Quick ice
making mode
Press
to display .
Ends automatically
It automatically completes after operating for about 9
hours, when the ice storage bin is full of ice (about 60 to
100 pieces) or when no water is left in the water tank.
indicator goes off and then
To improve clear ice
To increase crystal ice making time
Press ,
simultaneously and hold for about 3 seconds.
(Until a "beep" sound is heard)
indicator turns on and
applicable, will blink.
Displays of other compartments will be extinguished
temporarily.
Blinking
Press repeatedly and select "H" if you want to
make clearer ice cubes or "L" if you want to increase
crystal ice making time. The selected mode will blink.
After a while, a "beep" sound is heard and the blinking
display is left and after 2 seconds, it will stay lit and the
mode is set to the lighting display.
Display of other compartments will be reset to the previous
display.
Selecting "L," "M" or "H" will light only
Settings for crystal ice making time and clarity
Display
L
Ice making time
Faster than "M"
Clarity (percentage
70 to 80% of ice
of clear area)
It is set at "M" at the time of installation (purchase)
repeatedly
indicator goes on.
and
whichever
M H
About 5 to 8 hours Slower than "M"
80 to 90% of ice 90% or more of ice
.
11