Table of Contents
Advertisement
User library
>> To copy and paste sections to a scene(s)
1
In the Show Editor screen, click the sources that contain the sections you want
to copy to a scene(s). These are in the far left panel of the screen. You can
choose any combination of inputs, aux returns, aux sends, matrices, GEQs,
effects and masters.
2
In the Sections panel, click the boxes of the sections that you want to copy.
Ticked options will be copied.
3
In the Scenelist panel, click the scene(s) in which you want to paste the
sections. You can use the buttons at the bottom of the list to help you, as
follows:
• Click ALL to select all of the scenes in the list.
• Click NONE to deselect all selected scenes.
4
Click PASTE TO SCENES.
5
User library
The PRO6 has a user library where you can store
settings, such as for the EQ or the whole channel. For
example, you may wish to store the EQ settings of a
singer who may be called upon to perform during a
future show. You can then easily recall these EQ
settings to the appropriate channel, when required.
The settings are stored as presets, which along with the
library files, are managed via a Preset Manager
screen on the GUI. Here, you can create new libraries,
load existing libraries, save the current library or give it
a new name. You can also delete presets from the library.
>> To open the Preset Manager screen
From the GUI menu, choose home
>> To save a preset to the user library
1
Make sure that the settings you want to save are assigned to the channel strip,
then click store preset. If the channel's overview is displayed, all of its settings
will be saved in the preset. Otherwise, just the settings of the displayed
processing area will be saved.
2
In the Save Preset window (shown right), type in
your chosen preset name (Preset Name), your
name (Preset Author) and any note (Notes) as
necessary.
3
Click OK.
>> To load a preset
1
Make sure that the channel in which you want to
load the settings of the preset is assigned to the
channel strip, then click load preset.
2
In the Load Preset window, click the preset that you want to load.
3
Click OK.
PRO6 Control Centre
Quick Reference Guide
Preset Manager.
53
Advertisement
Table of Contents
