Midas PRO6 Quick Reference Manual page 52

38
>> To set up a gate
Input fast strip
1
1 Press the quick access button in the gate
section. This will select the channel and
open the gate processing area in the GUI's
channel strip.
2 Press ON to switch the gate on.
2
Graph showing
gating effect
Chapter 6: Basic Operation
3a
3d
3 Operate the controls in the D-zone to
adjust the gate parameters, such as attack,
release, threshold, ratio/range and hold.
D zone
3b
3c
PRO6 Control Centre
Quick Reference Guide