CITROËN C3 PICASSO Handbook page 180

Changing a front or rear wiper blade
Procedure for replacing a worn wiper blade with a new one without the use of tools.
Before removing a front
wiper blade
F Within one minute after switching off the
ignition, operate the wiper stalk to position
the wiper blades in the vertical position.
This position must be used in order to avoid
damaging the wiper blade and the bonnet.
Removal
F Raise the corresponding wiper arm.
F Unclip the wiper blade and remove it.
Fitting
F At the front, check the size of the wiper
blade as the shorter blade is fitted to the
passenger side of the vehicle.
F Put the corresponding new wiper blade in
place and clip it.
F Fold down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F Operate the wiper stalk again to park the
wiper blades.
Practical information
11
183