CITROËN C3 PICASSO Handbook page 156

F Position the foot of the jack 2 on the
ground, ensuring that it is directly below the
front A or rear B jacking points provided on
the underbody, whichever is closest to the
wheel to be changed.
F Extend the jack 2 until its head comes into
contact with the jacking point A or B used.
The vehicle's contact surface A or B must
be fully engaged with the central part of the
head of the jack.
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Practical information
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
could slip or drop - Risk of injury!
Position the jack only at one of the
jacking points A or B under the vehicle,
ensuring that the vehicle's contact
surface is positioned centrally on the
head of the jack. Otherwise, there is a
risk of damage to the vehicle and/or the
jack dropping - Risk of injury!
11
159