SecTION 3
3.5
gas Supply connections
1.
Connect the gas supplies. The cylinders may be placed and secured on the cylinder rack of the truck. Before connecting
the regulators, be sure to read, understand, and follow all instructions packed with each regulator.
2.
Connect the gas hoses to the regulators and to the proper fittings (Adaptors: 74S76, Air; 19X54, Ar/H
of the ESP-150. Connections should be wrench tight including those that are plugged. (Fig. 14)
(3) air Filter Regulators
P/N-36932
Fig. 13 - air Filter Regulator connections
Fig. 14 - gas connections
30
Select ONlY ONe (1)
Inlet connection,
NeVeR BOTH, when
selecting Plasma
gas
INSTallaTION
) on the rear panel
2