Spare Parts List - Art-Tech Diamond 1800 User Manual

4. If the motor runs slowly or the thrust is not powerful, please do not take it off. Check if the battery has been
fully charged, and if there is any problems with the motor or ESC. The power system can be adjusted during
flying to save power and lengthen the flying time, and the recommended method is flying---gliding—flying.
5. If you want to land it after flying for some time, pull the throttle stick to the low position and let it land gently.
6. After landing, plug off the battery power system and then switch off the transmitter, otherwise it will give
wrong instruction to the motor.
7. If the battery voltage of the transmitter is under the safety standard, the indicator will become red. Now
please land it as soon as possible to avoid it being out of control.
8. If the model always towards to right, please adjust the trim on the transmitter to the left until the model could
fly straightly. If the airplane always turn to left, move the inching switch to the right.
9. If the model plane flies nose-down, move the elevator trim to the lower position; If the model moves nose-up
or if there is any undulating flight, adjust the elevator trim upwards until level flight. If the trim has reached the
limits, please adjust the steel wire grip to make the flight back to normal.

Spare parts list

No.: 5101D
Fuselage set
No.: 41411
Battery(11.1V 1300mAh)
No.: 5102D
Main wing set
No.: 35023
Servo set
No.: 5103D
Tail wing set
No.: 3302D
20A Brushless ESC
13
No.: 5U051
Vertical fin
No.: 3A01Q
Brushless Motor
(DST-1200)