Volume; Adjusting Speaker Levels - Kyocera Fax Operation Manual

FAX System Settings

Volume

Adjusting Speaker Levels

Adjusting the Monitor Tone Volume
7-8
Adjust the speaker level and volume of the fax monitoring tone. Switch off
sound setting if no tone or speaker output is needed.
NOTE:
Refer to the Advanced Operation Guide for instructions on
adjusting the volume for warning tones (after errors) and confirmation
tones for operation panel keys.
Perform the following procedure to adjust the volume of the built-in speaker
in off-hook mode when
1
Press System Menu/Counter.
2
Press or to select Common Setting. Press Enter.
3
Press or to select Sound Setting. Press Enter.
4
Press or to select FAX Speaker. Press Enter.
5
Press or to adjust the
volume. Press Enter.
6
Press right Select to return to the basic screen.
Perform the following procedure to adjust the volume of the built-in speaker
during auto-transmission in off-hook mode when
pressed.
1
Press System Menu/Counter.
2
Press or to select Common Setting. Press Enter.
3
Press or to select Sound Setting. Press Enter.
4
Press or to select FAX Monitor. Press Enter.
On-Hook is pressed.
FAX Speaker
1 Minimum
* 2 Middle
3 Maximum
Cancel
:
On-Hook is not
OPERATION GUIDE