Cruise Control Lever - Kubota B2630 Operator's Manual

24 OPERATING THE TRACTOR
BCruise Control Lever
To avoid personal injury:
A Pull the cruise control lever completely to the
rear before starting the engine.
A Do not use the cruise control when driving on
the road.
A Be sure to connect both the left and the right
brakes when driving on the road. The speed
cruise control won't be released with single
brake activation.
Cruise control is designed for tractor operating efficiency
and operator comfort. This device will provide a constant
forward operating speed by mechanically holding the
cruise control lever at the selected position.
C To engage Cruise Control Device
1. The proper forward speed will be maintained if you
apply the cruise control lever at any position.
2. To operate faster than the set speed, depress the
speed control pedal further down in this condition. The
set speed will be resumed if you release the pedal.
C To disengage Cruise Control Device
A Move the lever all the way back and then to
"NEUTRAL" position to release the cruise control.
A Depress both brake pedals.
A Cruise control will be disengaged automatically when
both brake pedals are depressed.
A The cruise control device does not disengage when
the individual right or left brake is applied.
A Cruise control device will not operate in reverse.
A Preferably set the cruise control lever, while holding
down the speed control pedal. This makes the setting
smoother.
A When releasing the cruise mode, be sure to return the
cruise control lever fully backward.

(1) Cruise control lever

A When you stand up from the seat with the speed
control pedal stepped on or the cruise control lever
engaged (ON), the engine will stop regardless of
whether the machine is moving or not. This is because
the tractor is equipped with Operator Presence Control
system (OPC).
(A) "INCREASE"
(B) "DECREASE"
(C) "NEUTRAL"