Replacing Light Bulb; Lubricating Points; Adding The Washer Liquid; Checking The Amount Of Refrigerant (Gas) - Kubota B2630 Operator's Manual

76 PERIODIC SERVICE
C Protected circuit
CAPACITY
FUSE
(A)
No.
ROPS CAB
(1) 5 OPC
Head light
(2) 10 15
instrument cluster
(3) 20 Work light
(4) 20 15 Flasher / Hazard
(5) 30 Key stop
Aircon
(6) 10
compressor
(7) 20 Wiper radio
(8) 25 Aircon blower
(9) 10 Horn
(10) 20 Auxiliary
(11)
20 Defogger
Check circuit
(12) Slow blow fuse against wrong
battery connection
BReplacing Light Bulb
1. Head light
Take the bulb out of the light body and replace with a
new one.
2. Other lights
Detach the lens and replace the bulb.
Light
Head light
Tail light
Turn signal / Hazard light
Instrument panel light
Hazard light switch indicator
Work light
Tail light / Brake light
(if equipped)
Protected circuit ROPS
---
---
---
---
---
---
Capacity
ROPS CAB
23W
8W
27W and 20W
1.7W
0.6W
--- 35W
5W / 21W
BLubricating Points
[CAB only]
CAB
(1) Door hinge
(2) Rear window hinge
BAdding the Washer Liquid
[CAB only]
Add a proper amount of automobile washer liquid.
(Tank capacity: 1.5 liters (0.40 U.S.gals.) )
(1) Washer liquid tank
BChecking the Amount of Refrigerant (gas)
[CAB only]
To avoid personal injury:
A Liquid contact with eyes or skin may cause
frostbite.
A In the event of a leakage, wear safety goggles.
Escaping refrigerant can cause severe injuries
to eyes.
A In contact with a flame, R134a refrigerant gives
a toxic gas.