Advertisement
Quick Links
Model PT502
This timer is an electronic timing device, with
preset temperature control, which allows the
heating to be switched over a pre-programmed
period.
This device has 4 programmes:
Manual – the heating will be manually controlled
by a preset comfort level setting
P1
•Turn on at desired time
•Heat for 3.5 hrs
•Off for 8 hrs
•Heat for 5.5 hrs
•Off for 7 hrs
•The cycle is then repeated
P2
•Heat is on for 3 hrs
•Off for 21 hrs
•The cycle is then repeated
P3
•Heat for 3 hrs
•Off for 9 hrs
•Heat for 3 hrs
•Off for 9 hrs
•The cycle is then repeated
Heating On
5am
6am
7am
12am
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty: Two (2) year
Temperature control settings
Comfort: 20 C – 28 C
Backup: 5 C
Installation & Operating Instructions
Prog
Time
5pm
6pm
7pm
12pm
There are 4 available setpoints to identify
and select your comfort temperature
Model PT503
Model Information
Your new electronic thermostat is
equipped with a microprocessor.
Depending on the selected mode, this
thermostat has been designed to
control:
A: Ambient temperature
F: Floor temperature (floor heating)
The ON/OFF button should be pressed
once to turn off the thermostat. The
thermostat is now in sleep or standby
mode.
Setpoint Definition
HEAT
HIGH
LOW
Technical Specifications
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty:Two (2) year
Temperature control settings
Comfort: 20 C – 28 C
Backup: 5 C – 16 C
Model PT504
Your new electronic timer is
equipped with a microprocessor.
Depending on the selected time,
this timer has been designed to
control the temperature as
follows:
To set 2 hour/4 hour/ 6 hour mode
Press the On/Off button until the 2
hour LED light comes on.
Press the On/Off button three times
and the 4 hour LED light will come
on.
Then press the On/Off button three
times and the 6 hour LED light will
come on.
To set manual mode
Press the On/Off button and hold for
5 seconds. The Power and Man lights
will come on.
NB: The Power LED will be lit up
.
when the heating is on
The ON/OFF button should be
pressed once to turn off the timer.
Electrical rating: 230-240V, ac 50 Hz
Load:15A resistive
Warranty:Two (2) year
Advertisement
Related Manuals for Warmup PT502
Summary of Contents for Warmup PT502
- Page 1 Installation & Operating Instructions Model PT502 Model PT503 Model PT504 Model Information This timer is an electronic timing device, with Your new electronic timer is Your new electronic thermostat is preset temperature control, which allows the equipped with a microprocessor.
- Page 2 This product is warranted against defects in material and workmanship under normal conditions of use for a period of two (2) years from the date of purchase. During this period, Warmup will repair or replace the product if it is defective in normal operating conditions in terms of materials or workmanship with a new product of equivalent quality at Warmup's option.