CTC Union FMC-10/100 User Manual

Description
The FMC-10/100 Series gives you the option to choose from the most popular fiber cabling
connectors. The FMC-10/100 provides you with ST, SC or FC connectors for your fiber optic
cables and RJ-45 port for 10/100Base-TX twisted pair cable connection. The factory default
settings of Ethernet auto-negotiation may be modified by adjustment of external DIP
switches to force Full/Half 10/100 or LFP (Link Fault Pass-through) function settings. The
FMC-10/100 gives you the freedom to extend your 10/100Mbps cabling distance by allowing
connectivity up to 120 kilometers over fiber. Six LED indicators signal the power status of the
converter, UTP port speed, Link/Act, duplex status and FX port Link/Act and FEF (Far End Fault).
Features
■
10/100Base-TX to 100Base-FX Converter
■
Auto-Negotiation or forced mode
■
Auto MDI/MDIX
■
Forward 1600 bytes (Max.) packets
■
Support flow control (Pause)
■
Supports Link Fault Pass through (LFP)
■
Supports 802.3af Power over Ethernet (only FMC-10/100P)
s a l e s @ c t c u . c o m
Panel
■ Figure #1. FMC-10/100, FMC-10/100P
DC Jack
■ Figure #2. FMC-10/100-AC, FMC-10/100-DC
Power
Switch
AC Jack
or DC
Terminal
DC Terminal
-V FG +V
DC Model
18~75VDC
s a l e s @ c t c u . c o m
w w w . c t c u . c o m
Fiber
Connections
LEDs
Ethernet
Connections
External DIP
Switches
Fiber
Connections
LEDs
Ethernet
Connections
External DIP
Switches
AC Model
w w w . c t c u . c o m
CTC Union Technologies Co., Ltd.
w w w

User Guide

10/100BASE-T/TX to 100BASE-FX
Fiber Media Converters
FMC-10/100, FMC-10/100P
FMC-10/100-AC, FMC-10/100-DC
s a l e s @ c t c u . c o m
Specifications
Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, 100BASE-FX
Supports Full/Half Duplex Ethernet mode N-Way Auto Negotlation
Support 802.3af power over Ethernet (only FMC-10/100P)
10/100BASE-TX RJ-45 Connectors
One RJ-45 connector is provided for connection to MDI-X (To PC) or MDI (To HUB) equipment.
Auto MDI-X allows all UTP connections to be made using only a common straight-through
UTP cable.
RJ-45 Pin
1
2
3
6
100BASE-TX UTP Cable
Cable type: 100Base-Tx; Category 5 or better
Maximum cable distance: 100 meters (328 feet)
Fiber Optic Connectors
One connector is provided for fiber optic cable connection.
For both transmission and reception of optical data.
Please note that transceiver "A"must connect to transceiver "B"for proper fiber linking.
Environment
Operating -- 0°C – 50°C, Storage -- -10°C – 70°C,
Humidity -- 10 – 95%, (non-condensing)
Power
Adapter: 12VDC 1A, Built-in AC Power 100~240V ±10% , Built-in DC Power 18~75VDC
Dimensions: (W x D x H) mm
FMC-10/100 (P) : 74 × 108 × 23
FMC-10/100-AC : 86 ×192 × 30
s a l e s @ c t c u . c o m
. c t c u . c
MDI-X type MDI type
Rx+ Tx+
Rx -
Tx -
Tx+ Rx+
Tx -
Rx -
FMC-10/100P : 74 × 108 × 23
FMC-10/100-DC : 86 × 192 × 30
w w w . c t c u . c o m
o m