Updating The Firmware (Firm Update); Checking The Firmware Version (Version) - Yamaha RX-V3075 Owner's Manual

Updating the firmware (FIRM UPDATE)

SP IMP. - FIRM UPDATE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY MUTE
ZONE ZONE ZONE ADAPTIVE
USB
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware via the network" (p.141).

Checking the firmware version (VERSION)

DOCK SP IMP. - VERSION
TAG
HD
MUTE
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE ADAPTIVE
x.xx
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
3
HD
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "System" (p.129) in the "Information" menu.
• It may take a while until the firmware version is displayed.
VOLUME
DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
VOLUME
DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
132
En