Extras; Messaging - Kyocera QCP 2035 User Manual

Data/Fax Calls In
These settings tell the phone how to
handle voice and data calls.
3 3
1. Select Menu Settings
3
Network Data/Fax Calls In .
2. Press to select an option:
Voice Only—
• Allow only voice calls.
• Fax, next call— Set the phone to fax
mode for the next incoming call or
the next ten minutes.
• Data, next call— Set the phone to
data mode for the next incoming
call or the next ten minutes.
Fax, until off—
• Force the phone into
fax mode until the phone is turned
off.
• Data, until off— Force the phone into
data mode until the phone is
turned off.

Extras

These settings allow you to program
various options.
1-Touch Dialing
See "To use 1-Touch Dialing" on page 12.
22
Browser Prompt
You may receive a prompt whenever you
attempt to start or exit the browser.
3 3
1. Select Menu Settings Extras
Browser Prompt .
2. Press to select an option:
At Start—
• Prompt you when you
start the browser.
• At End— Prompt you when you exit
the browser.
• Both— Prompt you when you start
the browser and exit the browser.
• No Prompts— You do not receive any
prompts.

Messaging

The messaging settings allow you to set
how you want to handle incoming and
outgoing messages.
To change your voicemail number
You can change the phone number
assigned to speed dialing location "1" by
doing the following:
3 3
1. Select Menu Messages Msg
3
Settings Voicemail Number .
Settings
3