Download Print this page
Hide thumbs Also See for QCP-2035:

Advertisement

Tech Tip! –
Kyocera Wireless Corp.
QCP-2035 – Quick Service Programming Instructions
Overview
This document provides quick service programming instructions for the QCP-
2035 mobile phone.
Procedures
80-B6718-6 X1
1. Press the End/Power key (red) to
power on the phone.
2. Wait for the wake up sequence
to complete.
3. Enter 111111 (six 1s).
4. Option should be highlighted. If
it is not, use the Navigation key
to highlight it.
5. Press the Select key (star key
located in the upper right corner
above the Navigation key).
6. The Options screen displays.
7. Use the Navigation key to scroll
down to Programming.
8. Highlight Programming and
press the Select key.
9. The Security screen displays.
10. Enter the six-digit security code.
The default is 000000 (six 0s).
FYI
Note:
If code has been changed or is unknown,
you cannot proceed.
August 2000
1

Advertisement

loading

Summary of Contents for Kyocera QCP-2035

  • Page 1 Tech Tip! – Kyocera Wireless Corp. QCP-2035 – Quick Service Programming Instructions Overview This document provides quick service programming instructions for the QCP- 2035 mobile phone. Procedures 1. Press the End/Power key (red) to power on the phone. 2. Wait for the wake up sequence to complete.
  • Page 2 QCP-2035 – Quick Service Programming Instructions Procedures 11. The ESN screen appears after the Please Waiting Reading Service Parameters message. 12. Press the left arrow of the Navigation key to select OK. 13. Using the keypad, enter the ten- digit mobile phone number assigned by the carrier.
  • Page 3 Kyocera Wireless Corp.