Countdown Timer; Stopwatch - Kyocera QCP 2035 User Manual

+ Inserts the addition character after the
last number entered.
X Inserts the multiplication character after
the last number entered.
. Inserts the decimal point after the last
number entered.
C Clears all numbers entered and displays
a zero.
MR Displays the value currently stored in
memory.
M+ Adds the displayed digit to the value
stored in memory.
MC Clears the value currently stored in
memory.
± Changes the sign of the displayed
number.
Clears one function or one digit from the
screen and returns the calculator to digit
entry mode. Hold down to clear all of the
digits and operations and display a zero.
Exits the calculator and returns to the
home screen.

Countdown Timer

This timer counts down for a specified
amount of time. It beeps, using the
26
volume set for alerts, when that amount
of time has elapsed.
3 3
1. Menu Tools Countdown
Select
Timer .
2. Press to Set .
3. Press up or down to set the
hours, minutes, and seconds. To move
the cursor, press left or right.
4. Select Start to begin the countdown.
Select Stop to pause the countdown.
5. When the alarm rings, press
silence it.

Stopwatch

3 3
1. Menu Tools Stopwatch
Select
2. Select Start to have the stopwatch
begin counting.
3. Select Stop to quit counting.
4. Select Reset to set the counter back to
zero and have the stopwatch begin
counting again.
5.
Press when finished.
to
.
Tools