Table of Contents
Advertisement
Screen is frozen, the power cannot be
turned off.
If the screen is frozen or the power cannot
be turned off, open the docomo mini UIM
u
card slot cover
Press and hold red OFF
button for approximately 3 seconds and
release your finger after the terminal
vibrates 3 times to force-quit the power of
the terminal. Alternatively, press and hold
P
and the volume up key for
approximately 3 seconds and release your
finger after the terminal vibrates 3 times.
P.37
* Note that some data and settings may be
erased due to force-quit operation.
Charging
Cannot charge (The notification LED does
not turn on, or the icon does not indicate
charging status.)
Check if the adapter's power plug or
cigarette lighter plug is correctly inserted
to an outlet or cigarette lighter socket.
Check if the adapter cable and the
terminal are set correctly. P.34
When using the AC Adapter 04 (optional),
check if the microUSB plug of the AC
adapter is connected to the terminal or
supplied desktop holder correctly. P.33,
P.34
In case of using the desktop holder, are
the terminal's contacts for the desktop
holder dirty? Clean the contacts with a dry
cotton swab etc. if they are dirty.
When using Micro USB Cable 01
(optional), check if the PC is turned on.
If you execute calls, communications or
other function operations for a long time
while charging, the terminal may become
hot and the notification LED turns off
(charging stops) or battery level may
become low. In this case, wait until the
temperature of the terminal drops and
charge again.
The notification LED blinks in red and the
terminal cannot be operated.
When the battery level is low, charge the
battery. P.31
Appendix/Index
197
Advertisement
Table of Contents
