Sony Docomo Xperia Z1 SO-01F Instruction Manual page 213

For activating from Software update
notice screen, display the Software
update notice screen
"Ready for update. Please refrain from
starting other application. " is displayed,
then rewriting starts automatically. Tap
[OK] to start rewriting automatically.
While updating the software, all key
operations become disabled. Also,
updating cannot be canceled.
When the software update is complete,
the terminal restarts and the Home
screen is displayed.
❖ Information
If software update is not needed, "No update is
needed. " is displayed.
Post-update display
appears on the status bar. Drag the
status bar downwards
notification, a message indicating that
software update is complete appears.
Reserving software update
You can preset time to update the software if
you want to specify another time for
installing the update file.
Display the Software update
1
notice screen
u
Set a time [Set].
2
u
[Start update].
u
Tap the
u
[Set Time].
When the reserved time is reached
When the reserved time is reached, "Ready
for update. Please refrain from starting other
application." appears, then rewriting starts
automatically.
❖ Information
While updating the software, all key operations
become disabled and updating cannot be canceled.
If software update could not be started at the preset
time, the software update will be performed at the
same time the following day.
While upgrading Android software, software update
is not executed even when the set time arrives.
When an alarm etc. is set at the same time as the
reserved time, priority will be given to the software
update.
If SO-01F is turned OFF at the reserved time, the
software update starts at the same time as the
reserved time after the terminal is turned ON.
If (Software update was suspended Please check
the remaining internal storage capacity and retry.)
appears on the status bar during software update,
make sure that sufficient memory remains on the
phone memory and retry to update.
If (Software update was suspended Please check
the status of the handset and retry.) appears on the
status bar during software update, make sure that
the terminal is not in the following states and retry to
update.
- No signal
- Interfered by some function
Appendix/Index
211