Page 1
Owner’s Manual For Fuller Brush Canister V acuums Models FB-HM FB-HMP Thank you for purchasing this Fuller Brush Canister Vacuum. To ensure the best results, please read this manual first and keep it for future reference.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. When using an electrical appliance, basic precautions should always be followed, including the following: SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of fire, electric shock or injury: 1� Do not leave appliance unattended when plugged in� Unplug from outlet when not in use and before servicing� 2�...
Two-Wire Polarized Cord This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other)� This plug fits into the power outlet only one way� This is a safety feature� If you are unable to insert the plug fully into the outlet, try reversing the plug�...
(FB-HMP model only) (Fig� 2)� How to Extend the Wand Grasp the wand extension grip (FB-HMP model) or the wand extension button (FB-HM model) and pull up on the hose handle to extend the wand to the desired length� On/Off Switch Fig.
How to Replace the Vacuum Bag Always operate the vacuum cleaner with a bag installed properly� Change the vacuum bag when the full bag indicator appears or when suction power is weak� The bag compartment lid will not close without a bag in the holder or if the bag is not properly installed�...
(Fig� 5)� Fig. 4 FB-HM Model The crevice tool and dusting brush are conveniently stored on the hose handle for easy reach� The upholstery tool is stored on the tool caddy attached to the wand (Fig�...
2� The tab on the back of the tool caddy conveniently stores on the bottom of the vacuum (Fig� 3)� FB-HM Model 1� The tab on the back of the rug/floor tool conveniently stores on the back of the vacuum when it is attached to the end of the wand (Fig� 2)�...
How to Operate the Power Nozzle FB-HMP Model How to Turn On the Power Nozzle 1� The power nozzle can only be turned on if the canister is also turned on� The canister On/Off pedal is located on the main body� 2�...
How to Replace the Power Nozzle Belt FB-HMP Model The brushroll may need to be removed at times, to cut threads that have become tangled around it or to replace the belt� 1� Turn the nozzle over and squeeze the tabs in the middle toward each other�...
Troubleshooting Guide Please check each item below if you have trouble with your vacuum� Unplug the vacuum from the power supply before servicing� Problem Check Point Possible Solution Suction power is weak. • Vacuum bag • If vacuum bag is full, replace it. •...
Need help?
Do you have a question about the FB-HM and is the answer not in the manual?
Questions and answers