Page 1
Owner’s Manual For Fuller Brush Jiffy Maid Bagless V acuumS Model FB-JFM FB-JFM.PET Thank you for purchasing this Fuller Brush Upright Vacuum. To ensure the best results, please read this manual first and keep it for future reference.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. When using an electrical appliance, basic precautions should always be followed, including the following: SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of fire, electric shock or injury: 1� Do not leave appliance unattended when plugged in� Unplug from outlet when not in use and before servicing� 2�...
Two-Wire Polarized Cord This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other)� This plug will fit into the power outlet only one way� This is a safety feature� If you are unable to insert the plug fully into the outlet, try reversing the plug�...
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4 Using in upright mode / Assembly VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4 VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 4 How to Assemble and Operate the Vacuum Using in upright mode / Assembly Using in upright mode / Assembly Using in upright mode / Assembly How to Attach the Handle to the Vacuum Cleaner...
VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Pag How to Adjust the Handle Tool storage The hand-held turbo nozzle (13) and crevice tool The handle on this vacuum cleaner can be set to one of three positions – upright, middle with dust brush attachment (21) may be stored in (14 &...
Using tools and accessories On-Board Tool Cleaning Release the power cord (17) and plug in to the mains outlet as in ste Assembly’. VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 5 The Jiffy Maid is equipped with on-board cleaning tools including VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 5 a metal wand (handle tube), stretch hose and crevice with dusting VC73420MUK Rev1_Instruction Book 30/04/2012 12:17 Page 5...
cleaner face down, in a flat position on a soft ensuring th Removing brush bar and belt surface (eg. carpet). belt. Pass the rot Using a cross-headed screwdriver, unscrew the 5 ensuring the Removing brush bar and belt screws on the base of the cleaner to release the belt.
Thermal Motor Protection Your Fuller Brush vacuum cleaner comes equipped with a thermal protector designed to protect your vacuum cleaner from overheating due to restricted airflow (i�e� clogged hose)� Should this situation occur, the thermal protector will automatically shut the motor off to avoid any potential damage� NOTE: To determine if the thermal protector turned off the vacuum cleaner, refer to the vacuum cleaner’s headlight�...
Troubleshooting Guide Problem Check Point Possible Solution Suction power is • Dust container • If the dust container is full, empty it. weak. • Floor nozzle • If clogged, remove the object. • Filters • Clean or replace filters. The vacuum does •...
Need help?
Do you have a question about the FB-JFM and is the answer not in the manual?
Questions and answers