Kyocera Jet KX18 User Manual page 90

To activate the Voice Wake-up setting:
→
1. Select Menu Settings
→
Features Voice Wake-Up
With accessory.
→
2. Select Menu Settings
Disabled, then press the Amp'd/OK key
To wake up the phone:
1. Say "Wake Up" and listen for a tone.
2. Say "Wake Up" again until you hear
two tones.
If the phone does not recognize your
"Wake up" command, see "Training voice
recognition" on page 83.
Answering the phone
You can set your hands-free car kit to
(1) answer automatically or (2) answer using
a voice command.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
Select Menu → Settings →
•
Accessories → Auto-Answer →
After 5 secs.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
Select Menu → Settings →
•
Accessories → Auto-Answer → Disabled.
PAGE 82 MAKING A CALL USING DIGIT DIALING
|
To activate the Voice Answer setting:
→
Voice 1. Select Menu
→
2. Highlight Enabled and press the
→ →
Keyguard
.
3. Select Menu
To answer a call:
When you receive an incoming call, the phone
responds: "Incoming call, answer?" or
"Incoming roam call, answer?" If the caller is
recognized as a contact entry in your phone,
then the phone will say "Incoming call from
(Name), answer?"
•
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
•
•
USING VOICE RECOGNITION
|
→
Settings
→
Voice Features Voice Answer.
Amp'd/OK key .
→
Settings
→
Silent Mode Normal Sounds, then
press the Amp'd/OK key
Say "Yes" or press any key except the
End/Power key .
Say "No" and press the End/Power key
to silence the alert.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to
the home screen.
→
→
.