Notes:
•
You can view these numbers only when
they're being entered for the first time.
•
To make a call to an emergency number
from a locked phone, you must dial the
number (including area code) exactly as it
was stored in Emergency Numbers.
Limiting calls
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and service provider numbers.
→
1. Select Menu
Settings
2. Enter your four-digit lock code.
3. Select Limit Calls.
4. Choose an option and press the
Amp'd/OK key
No Limit limits no calls.
•
Limit Outgoing calls only. Incoming
•
calls can still be received and answered.
Limit All limits both incoming and
•
outgoing calls.
Erasing all contacts
You can erase all entries in your
Contacts directory.
→
1. Select Menu
Settings
2. Enter your four-digit lock code.
3. Select Erase Contacts.
4. Select Yes to erase all contacts. A message
appears: "Erase ALL Contacts?"
5. Select Yes again to erase all contacts.
PAGE 59
NETWORK SETTINGS
|
→
Security.
:
→
Security.
CUSTOMIZING YOUR PHONE
|
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were "off" for that number. Your voicemail,
however, will still take messages. All contacts
and settings are shared for both lines.
Note: You must first establish a second phone
line with your service provider. Once
established, a second phone number
becomes available in the menu
for selection.
→
1. Select Menu
Settings
Set Phone Line.
2. Select one of the two lines and press the
Amp'd/OK key
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for
the hearing impaired.
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to the phone.
2. Enter # Space, # Space, 8, 8, 9 (
) on your keypad.
3. Select the TTY option.
4. Press the Amp'd/OK key
the message.
5. Highlight an option and press the
Amp'd/OK key
→
→
Network
.
to clear
.