Table of Contents
Advertisement
2
MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can be received. Look for the
screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it changes to power save mode. Press any key to return to
normal operating mode.
Slide open
1. Enter the phone number and press the
Send/Talk key
.
2. Press the End/Power key
(if "Close to End" is enabled. See "Ending
calls using the slide" on this page).
Slide closed
You can select a contact from your Contacts list
or use the voice dialing feature to initiate a call
with the slide closed. See "Creating a voice tag
for a contact" on page 80.
Voice dialing for a contact with a voice tag:
1. From the home screen, press the Send/Talk
key
to initiate voice dialing.
2. Say the name of the contact when
prompted. The phone places the call.
3. When finished, press End/Power key
PAGE 9
MAKING A CALL
|
or close slide
.
MAKING AND ANSWERING CALLS
|
Voice dialing a number without a voice tag:
1. From the home screen, press the Send/Talk
key
to initiate voice dialing.
2. Say the word "dial."
3. Speak the phone number one digit
at a time.
4. The phone places the call. When finished,
press End/Power key
5. For complete Voice dialing instructions, see
page 80.
Ending calls using the slide
You can set the phone to end calls immediately
when you close the slide.
→
•
Select Menu
Settings
→
Convenience
Close to End
Select Disabled to have the phone call
•
continue when you close the slide.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
symbol on the home
once.
→
→
Enabled.
Advertisement
Table of Contents
