Setting Sounds For Your Phone; Adjusting Volume - Kyocera Jet KX18 User Manual

Setting sounds for your phone

You can set your phone to emit tones when you
open and close the slide and when you turn the
phone on and off. These sounds will not occur
during an incoming call, if you are on a call, or if
a headset or car kit is attached to your phone.
Set sound when slide opens
→
1. Select Menu Settings
Slide Open.
2. Scroll through the list to hear the sounds
and press the Amp'd/OK key
select one.
Set sound when slide closes
→
1. Select Menu Settings
Slide Closed.
2. Scroll through the list to hear the sounds
and press the Amp'd/OK key
select one.
Set sound when phone powers on or off
→
• Select Menu Settings
Pwr On/Off Sound
To not play a sound, select Disabled.
•
PAGE 54 SETTING SOUNDS FOR YOUR PHONE
|
→ →
Sounds
to
→ →
Sounds
to
→ →
Sounds
→
Enabled.
CUSTOMIZING YOUR PHONE
|

Adjusting volume

You can adjust volume of the earpiece, ringer,
speakerphone, and key tones.
Adjusting the earpiece volume
To adjust the earpiece volume manually during a
call, press the volume key on the side of the
phone up or down.
To set the earpiece volume:
→
1. Select Menu Settings
Earpiece Volume.
2. Press the Navigation key
the volume or left to decrease the volume
and select Save.
Using smart sound
You can set a baseline volume that the phone
uses to automatically adjust the earpiece volume
when there is a change in the amount of noise
around you or the caller's voice.
→
• Select Menu Settings
→
Smart Sound Enabled.
Adjusting the ringer volume
→
1. Select Menu Settings
Ringer Volume.
2. Press the Navigation key
the volume or left to decrease the volume
and select Save.
Adjusting speakerphone volume
→
1. Select Menu Settings
Spkrphone Volume.
2. Press the Navigation key
the volume or left to decrease the volume
and select Save.
→ →
Sounds
right to increase
→ →
Sounds
→ →
Sounds
right to increase
→ →
Sounds
right to increase