Keyguard; Choosing Ringers; Setting Sounds For Your Phone - Kyocera Jet User Manual

– Vibe then Ring: The phone vibrates
for the first 10 seconds and then rings
for the remainder of the incoming
call alert.
screen.
– Lights Only: The phone lights up for
the duration of the incoming call or
other alert.
home screen.
– Normal Sounds: The phone rings for
the incoming call or alert (in effect,
returns phone to a non-silent mode).
Note: The phone will ring when it is
attached to an external power source
(such as a charger), even if all sounds have
been silenced.
Shortcut to Vibrate Only mode
• Press and hold the Space # key
Turning sounds back on
→
• Select Menu
→
Mode Normal Sounds.
- or -
Press and hold the Space # key

Keyguard

→
1. Select Menu
2. Select Guard On Close or Disabled.
the Amp'd/OK key
• Press
unlock.
appears on the home
appears on the
→
Settings Silent
→
Settings Keyguard.
to
CUSTOMIZING YOUR PHONE

Choosing ringers

Your Kyocera Jet/Angel phone has pre-
programmed ringers you can choose to
use for incoming calls.
1. Select Menu
Ringer Type.
2. Scroll down the list to hear the different
ringers and press the Amp'd/OK key
to select one.
Note: Downloaded ringers are added to
the end of the standard list of ringers.
Assigning business and personal
ringers
You can assign ringers to contacts
classified as business or personal in your
.
Contacts directory.
Note: To classify a contact as Business or
Personal, see "Classifying contacts as
Personal or Business" on page 22.
1. Select Menu
2. Highlight Business Ringer or Personal
.
Ringer and press the Amp'd/OK key
.
3. Select a ringer and press the Amp'd/OK
key
Setting sounds for your
phone
You can set your phone to sound tones
when you open and close the slide and
when you turn the phone on and off.
→ →
Settings
→ →
Settings
.
 
Keyguard PAGE 56
→
Sounds
Sounds.
