Preferences; Time Zone; Time Format; Coordinates Format - Minelab GPZ7000 Instruction Manual

Preferences

Preferences
The Preferences page contains the following functions:

• Time Zone

• Time Format

• Coordinates Format

• Length Units

• Weight Units

• Guides

The Preferences Page
Time Zone
Time Zone is based on Universal
Coordinated Time (UTC), and options
range from UTC −12:00 to UTC +14:00,
increasing in 30 minute increments.
Time Format
Time can be displayed in either 12
hour (default) or 24 hour format.
Coordinates Format
The Coordinates Format provides the
conversion of latitude and longitude
coordinates. There are two available
options:
• DMS – Degrees° minutes' seconds" (default)
(e.g. 34° 54' 42" S 138° 33' 24" E)
• DM – Degrees°minute.decimal'
(e.g. 34° 54.7098' S , 138° 33.4116' E)
Length Units
Length Units can be configured to
centimetres and metres (default), or
inches and yards. This function sets the
units of measure for the Map,
navigation, and for the depth entry for stored FindPoints.
Weight Units
Weight Units can be configured to troy
ounces (default), grams or grains, and
sets the units of measure for weight of
stored FindPoints.
Guides
Guides allows you to turn on or off the
Quick-Trak Guide and animation, and is
On by default. The Connect WM 12 and
Connect Additional WM 12 Guide
sequences remain on at all times.
30