Checking The Brake Oil Level; Braking System Fluid Top Up - PIAGGIO Beverly 400 I.E Maintenance Instructions Manual

Hide thumbs Also See for Beverly 400 I.E:
Table of Contents

Advertisement

Checking the brake oil level (03_16, 03_17)

The brake fluid tanks of the front and rear brakes are located on the pumps under the
covers on the handlebar. Proceed as follows:
1. Place the scooter on its centre stand and make sure the handlebar is centred;
2. Remove cover "A" by removing the respective retaining screw "B";
3. Check the fluid level through the respective sight glass "C".
A certain lowering of the level is caused by wear on the pads. Should the level appear
to be below the minimum mark, please contact your nearest PIAGGIO Dealer or Au-
03_16
thorised Service Centre in order to have a thorough inspection of the brake system
carried out.
03_17

Braking system fluid top up

Proceed as follows:
Remove tank covers "A" and loosen the two screws and top up the brake fluid level
using only the prescribed brake fluid and without exceeding the maximum level.
Under normal climatic conditions, the brake fluid must be replaced every 20,000 km
or every two years, whichever comes first. This operation must be carried out by
trained technicians; please contact your nearest PIAGGIO Dealer or Authorised
Service Centre.
46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents