Tyres - PIAGGIO Beverly 400 I.E Maintenance Instructions Manual

Recommended products
AGIP ROTRA 80W-90
Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications
Characteristic
Quantity:
approx. 250 cc

Tyres (03_10)

Check periodically (roughly every 500 km) the tyre pressure. The tyres are equipped
with wear indicators; the tyres must be changed as soon as these indicators become
visible on the surface. Also check that the tyres do not show signs of splitting at the
side or irregular tread wear; should this occur, take your vehicle to an authorised
workshop or a workshop equipped for replacement.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.
39