Removing The Air Filter - PIAGGIO Beverly 400 I.E Maintenance Instructions Manual

Hide thumbs Also See for Beverly 400 I.E:
Table of Contents

Advertisement

N.B.
THE USE OF SPARK PLUGS OTHER THAN THE INDICATED TYPE OR OF
SHIELDLESS SPARK PLUG CAPS CAN CAUSE ELECTRICAL SYSTEM FAIL-
URES.
Characteristic
Spark plug
NGK CR7EKB
Champion RG6YC
Electrode gap
0.7-0.8 mm

Removing the air filter (03_12)

Proceed as follows:
- Loosen the clamping screws and remove the air filter cover "D";
- Remove the filter element and clean it with water and shampoo; then dry it with a
clean cloth and slight blows of compressed air. Finally, immerse it in a mixture con-
taining 50% oil of the recommended type and 50% petrol.
Then gently squeeze the filter element between your hands, allow it to drip and then
refit it.
03_12
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NECESSARY TO SERVICE
THE AIR FILTER MORE OFTEN TO AVOID DAMAGING THE ENGINE.
42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents