F800 Configuration (Web); Tools; Login - Lenovo F800 User Manual

Remaining white: the product has proper disk connection
3. Wireless indicator:
Flashing blue: F800 is loading core program
Remaining blue: wireless signal is stable
Flashing green: the product is connecting to the network
Remaining green: network connection is successful

F800 Configuration (WEB)

2
You can enter the WEB management interface to configure F800 through PC/Mac OS client or by
directly typing "192.168.100.1" into the browser. Although this part mainly addresses PC clients,
the operation on Mac OS is pretty much the same.

2.1 Tools

1. PC client
2. Browser
Note: You can find the Windows PC client and Mac client from the local hard drive.

2.2 Login

1. Turn on F800. When the signal is stable, connect the PC to wireless "LenovoF800-xxxx"
(password: 11111111).
2. Double-click the PC client, as follows:
Note: If the IP address is not found in the client, please click "Refresh".
3. Click F800 in the above main interface. When "Login" is highlighted, click "Login" to enter the
WEB management login interface. You can also double-click F800 to open the login interface. The
interface is shown as follows:
Image 2-1 PC client main interface
User Manual of Lenovo F800