Playback A Scene - Botex Smart Director 256 User Manual

2. Operation Guide
2.1.3 Preview a Scene
SCENE 1-40

2.2 Playback a Scene

K
SCENE
SCENE 1-40
Pressing and holding down the Scene button allows you to access 40-channel
On/off (257-296) mode. Then you can push relevant button to change its On/off
setting. The channel is on if its LED is lit, while the channel is off if its LED
goes out.
9
4. Tap one of 1-40 buttons that holds the scene you
want, the LED near this button will flash indicating
a preview of the scene is proceeding.
1. Apply power on, tap Scene button causing its LED
to light or flash.
The LED is lit indicating the scenes will be recalled
instantly. The LED flashes indicating the scenes will
be recalled to fade in or fade out.
2. Use UP/DOWN button to select the bank.
3. Tap one of 1-40 buttons that holds the scene you
wish to playback, the LED near this button is lit indicating
this operation.
4. Tap the button again to go back.