Installing Coupling Assembly; Connecting Hose A - Mahindra 3016 User Manual

INSTALLING
COUPLING ASSEMBLY
1.Install adapter to the coupling assembly.
2. Install clamp coupler to the coupling as-
sembly.
COUPLING COUPLING
ASSEMBLY ASSEMBLY
ADAPTER ADAPTER
Coupling assembly and coupler cap are
not included in a kit
3. Install coupling assembly to the bracket
(A) with four bolts (M8 x 20mm) and four
nuts (M8).
Tighten the bolts to the following torque.
18-22Lbf ft (25-29N m)
BOLTS(M8x20mm) BOLTS(M8x20mm)
BRACKET(A) BRACKET(A)
BOLTS(M8x20mm) BOLTS(M8x20mm)
CLAMP COUPLER CLAMP COUPLER
COUPLER CAP COUPLER CAP
COUPLING COUPLING
ASSEMBLY ASSEMBLY
NUTS (M8) NUTS (M8)
16

CONNECTING HOSE A

1.Install seal A to the center cover.
2. Pass hose A through the hole of a center
cover.
HOSE A HOSE A
3.Fix hose A with wire band.
FENDER R.H. FENDER R.H.
4.Connecting the hose A and adapter
COUPLING ASSEMBLY COUPLING ASSEMBLY
ADAPTER ADAPTER
HOSE A HOSE A
CENTER COVER CENTER COVER
SEAL A SEAL A
HOSE A HOSE A
CENTER CENTER
COVER COVER
WIRE BAND WIRE BAND
SEAL A SEAL A
BRACKET (A) BRACKET (A)