Installing Position Control Lever; Installing Bracket - Mahindra 3016 User Manual

INSTALLING POSITION
CONTROL LEVER
1. Install position control lever to the position
arm with two bolts (M8x25mm).
Tighten the bolts to the following torque.
18-22Lbf ft (25-29N m)
POSITION ARM POSITION ARM
POSITION CONTROL POSITION CONTROL
BOLTS BOLTS
POSITION ARM POSITION ARM
POSITION CONTROL LEVER POSITION CONTROL LEVER
2.Install tube to the position control lever.
POSITION CONTROL LEVER POSITION CONTROL LEVER
TUBE TUBE
1. Install bracket (C) to the bracket (B) with
LEVER LEVER
2. Install bracket (A) and bracket (B),(C) to
BOLTS BOLTS
BOLT BOLT
(M8x20mm) (M8x20mm)
15

INSTALLING BRACKET

bolt (M8x16mm).
BRACKET (B) BRACKET (B)
BOLT BOLT
(M8x16mm) (M8x16mm)
the center cover with four bolts (M8x20 mm
: 3pcs, M8x16mm:1pcs).
Tighten the bolts to the following torque.
18-22Lbf ft (25-29N m)
CENTER COVER CENTER COVER
BRACKET (A) BRACKET (A)
BOLT BOLT
(M8x16mm) (M8x16mm)
BRACKET (C) BRACKET (C)
BRACKET (A) BRACKET (A)
BRACKET (B),(C) BRACKET (B),(C)
BRACKET (A) BRACKET (A)
BOLT BOLT
(M8x20mm) (M8x20mm)
BRACKET (B),(C) BRACKET (B),(C)