DISASSEMBLING REAR WHEEL R.H.
1. Jack up the R.H. rear axle and remove the R.H. rear wheels by removing the six bolts
(M14x30mm), six washers from the axle hub.
DISCONNECTING LEVER AND HYDRAULIC BLOCK
1. Remove the position control lever by removing the two bolts (M8x16mm) from the hydrau-
lic housing.
2. Remove the hydraulic block by removing the three bolts (M8x60mm:2pcs,M8x30mm:1pcs)
from the hydraulic housing.
BOLTS(M8x60mm)
BOLTS(M8x60mm)
BOLTS(M8x30mm)
BOLTS(M8x30mm)
HYDRAULIC BLOCK
HYDRAULIC BLOCK
WASHERS
WASHERS
BOLTS
BOLTS
POSITION CONTROL LEVER
POSITION CONTROL LEVER
BOLTS(M8x16mm)
BOLTS(M8x16mm)
10
REAL AXLE
REAL AXLE
HYDRAULIC HOUSING
HYDRAULIC HOUSING
AXLE HUB
AXLE HUB
JACK
JACK
is not used.
is not used.