Table of Contents
Advertisement
Programmable functions
It is possible to programme additional func-
tions or change programme sequences. See
Programme changes.
Any changes to the standard machine ver-
sion must be noted on a card left with the
machine as a record for any subsequent
servicing work. This is of particular impor-
tance for the service technician, when elec-
tronic units may need to be exchanged.
Coin operating mechanism/coin
unit
Selecting a programme with a coin unit in
use
^ Open the on-site stopcock(s). Switch on
the on-site mains switch.
^ Select a programme and temperature.
m "Starching", w "without final spin" are not
available with coin operation.
^ Add detergent and any fabric conditioner.
^ Insert coins/tokens.
^ Press the " h Start" button.
Coin unit C 5002, C 5003, C 4060
Coins or tokens are "lost" if any of the follow-
ing are done after the coins have been in-
serted but before the " h Start" button has
been pressed:
– the machine door is opened,
– the programme selector has been turned
past " r End" to another programme.
– a programme is interrupted for more than
20 seconds with the coin time counter.
Note for the user:
Coins and tokens should be emptied on a
regular basis to ensure the coin box does
not get jammed full.
M.-Nr. 06 006 810
Additional functions
17
Hide quick links:
Advertisement
Table of Contents
