Names Of Parts; Main Body; Section 2 Names Of Parts - Kyocera copier Operation Manual

Section 2

Main Body

(7)
(9) (8) (10)
(1) Original cover
(Open/close this cover when you are setting the original on the
platen.)
(2) Platen
(Set originals here for copying. Be sure to lay originals
face-down and align them flush up against the left rear corner
of the platen.)
(3) Original size indicator plate
(Be sure to align originals flush up against this plate when
setting them on the platen.)
(4) Operation panel
(Perform copy operations here.)
(5) Upper front cover
(Open this cover when you need to replace the toner container
or if a paper jam occurs inside the copier.)
(6) Front cover
(Open this cover when you need to replace the toner container
or if a paper jam occurs inside the copier.)
(7) Process Unit
(Take this unit out when you need to replace the toner
container or if a paper jam occurs inside the copier.)

NAMES OF PARTS

(3)
(11)
(4)
(5)
(6)
(8) Toner container
(9) Lock lever
(Operate this lever when you need to replace the toner
container.)
(10) Toner container release lever
(Operate this lever when you need to replace the toner
container.)
(11) Charger cleaner
(Slide this knob back and forth when you need to clean the
charger.)
(1)
(2)
2-1