Kyocera Data Security Kit (B) For Copier Operation Manual page 16

Administrator Information
5 Enter the new management code using the numeric keys.
Management code change
Change the management code.
Use the numeric keys to set 8 digit numbers.
System Menu
Press the Close key.
6
Step 3: Hard Disk Overwrite Setting
Selects the hard disk overwrite. See page 1-10 Hard Disk Overwrite for
further details.
Note
Note that it does not apply to overwrite and formatting individually.
Press the Default Setting/Counter key.
1
Press the Machine Default key.
2
3 Use the numeric keys to enter the current Management code. The factory
default numbers are 80008000 for 80 cpm model and 60006000 for 60 cpm
model.
Select Hard Disk Overwrite from the left side setting field, and press the
4
Change # key.
Press 3-time Overwrite or Once Overwrite.
5
Hard Disk Overwrite
Select the hard disk overwrite.
System Menu
Press the Close key.
6
1-14
27451172
Clear
- Machine Default
Once
Overwrite
3-time
Overwrite
- Machine Default
Back Close
Back Close