Hard Disk Utility; Exiting Setup - Pine Technology PT-429G User Manual

SECTION 5
5. IO Hard Disk Utility
If the Hard Drsk Utility menu is selected from the Setup main menu, you will be presented with three
options: Hard Disk Format, Auto Interleave, and Media Analysis. Performing any of these operations will
destroy all data on the hard disk, so be sure to backup your data before selecting any of these options.
drives are factory low-level formatted, and should not be re-formatted. Check with your hard disk
manufacturer before selecting this option.
the hard disk.
unusable, the track is marked as a "bad" track which prevents the system from writing data onto it.
Many hard disk manufacturers provide this feature to show a list of bad tracks. Therefore, this test can
be skipped most of the time.
ESDI and SCSI hard drives normally should NOT be low-level formatted. Refer
to your hard disk dealer or manufacturer before using the AMI Hard Disk Utility.

5.11 Exiting Setup

Notr :Mis-configuring
decrease the overall system performance. The Auto BIOS configuration setup
is always recommended to the mainboard's users.
.
the BIOS setup may lead to the failure of the CMOS setup or
27