Getting Help - Pine Technology PT-429G User Manual

SECTION 5
Entering CMOS Setup
5.2
Select Advanced CMOS Setup to access the Advanced CMOS Setup menu, which is discussed in
section 5
6.
The Advanced Chipset Setup to access the Advanced Chipset Setup menu, which is discussed in section
5.7.
Select Auto Configuration with BIOS Defaults to load the default system values. You will be prompted
for confirmation, and notified that the values have been loaded.
Select Auto Configuration with Power-On Defaults to load the default power-on values, which disable
problem. You will be prompted for confirmation, and notified that the values have been loaded.
Select Change Password to access the password security menu, which is discussed in section 5.8 below.
Select Hard Disk Utility to access the hard disk utility menu, which is discussed in section 5 9 below.
Select Write to CMOS and Exit to save your configuration and exit the Setup program. You will be
prompted for confirmation before the changes are written to CMOS and the system reboots.
Select Do Not Write to CMOS and Exit to cancel any changes to your configuration and exit the Setup
program. You will be prompted for confirmation before the system reboots.
A warning message will appear each time you select Standard or Advanced CMOS Setup.

5.3 Getting Help

the Advanced CMOS Setup menu by pressing Fl], A "popup" window till appear, similar to the one
color and F3] for foreground color.
5.4 Using Setup
The following keys and key combinations are used to maneuver among Setup options and to change
values.
turned off.
.
Setup program was entered.
20