Ip8000 Configuration; Initial Configuration; Retrieving Ip Address; Connecting To The Ip8000 Web Interface - ShoreTel IP8000 Application Note

From the individual trunks "Edit Trunk" screen, input a name
for the individual trunks, select the appropriate switch, select
the SIP trunk type and input the number of trunks. Select the
switch upon which the individual trunk will be created. For
the SIP Trunk Type decide whether the trunks are to be
configured as dynamic or static. For the "SIP Trunk Type"
field select either "Dynamic" or for a static configuration
select "Use IP Address" button and input an IP address. In
this example a dynamic SIP trunk type has been chosen but
static trunks are typically configured for IP8000 conference
phones. The last step is to select the number of individual
trunks desired. Once these changes are complete, select the
"Save" button to create the list of individual trunks).
Note:
Individual SIP trunks cannot span networks. SIP trunks
can only terminate on the switch selected. There is no
failover to another switch.
After setting up the trunk groups and individual trunks refer
to the ShoreTel Product Installation Guide to make the
appropriate changes for the User Group settings. This
completes the settings for the ShoreTel system side.

IP8000 Configuration

ShoreTel System Settings – General:
• Refer to the Quick Reference card for detailed information
on connecting the required Ethernet cable with PoE to the
unit.
• After applying power for the 1st time or after a reset to
factory settings, the IP 8000 will require configuration of its
locale and network settings.
• First of all the preferred language needs to be set. The
languages are selected by pressing one of the digit keys as
shown on screen e.g. to select English, press the digit 2.
• The LCD display will then show a heading of
ration and will display the following: "Configure your
ShoreTel IP8000 for your locale and network."
Press the (mute) button to continue to the next screen.
• The LCD will then display several screens of help text,
starting with an explanation of how the volume button
works, which acts as an up and down scroll button. Press the
mute button to advance. Additional help screens are then
displayed: for the button, redial button and how to
access the Admin Login after initial configuration is com-
plete. Advance through the screens by pressing the
button.
• Next, the Preferences of the phone need to be configured.
This process spans 4 menus :
– Preferences ( Menu 1 of 4)
* Location: default setting is United States. If you
wish to change it press the
the volume buttons to scroll to the desired setting,
press the button when you've selected the
correct option. Follow this procedure for changing
all of the options. Press the volume button,
negative side (-), to scroll down to the next option.
–
–
–
• Additional configuration is required which is best performed
via the web interface as described below.

Retrieving IP Address

Before connecting to the IP8000 web interface, take note of the
IP address of the phone as displayed in the bottom left corner
Initial Configu-
of the LCD display.

Connecting to the IP8000 Web Interface

Access the web interface for the IP8000 conference phone by
opening a web browser and entering the IP address (previously
obtained) as follows:
Example:
You may be presented with the following screen when access-
ing the web interface:
button, then use
Click on the Yes button to proceed.
: default setting is 1234. Change
* Admin Password
this if desired.
Preferences ( Menu 2 of 4)
* System Name : default setting is ShoreTel. This is
typically set to the name of the room in which the
conference phone is deployed or some other
meaningful value. It can be changed here of later
using the web interface. Scroll down to the next
option.
* Phone Number : No default value (blank). This is
best set via the Web interface later. Scroll to the
next option.
Preferences ( Menu 3 of 4)
* DHCP : default is enabled. If static IP configuration is
desired, be sure to disable DHCP, and then scroll
down.
* IP Address : no default value (null). Enter a value if
needed and then scroll down to the next parameter
* Subnet Mask : default is 255.255.255.0, Change as
needed and scroll down to the next parameter.
Preferences ( Menu 4 of 4)
* Default Gateway : default is a NULL value. Configure
if necessary and scroll down to the next option.
* Host Name : default is NULL. Once you've config-
ured these options, scroll down to the Save Settings
prompt and press the button.
http://<IP address>
http://10.0.1.51
IP8000 Conference Phone Application Note—Page 10