Table of Contents
Advertisement
Levelling the machine
The machine must stand level to en-
sure smooth operation. Check with a
spirit level.
The feet are levelled using the screw
feet as follows:
Unscrew foot or feet until the
machine stands level.
Hold the foot tight using a pipe
wrench.
Tighten the counternut using a
screwdriver as indicated.
Washer-Dryer stack
A Miele tumble dryer can be stacked
with this washer-extractor, using a spe-
cial stacking kit*.
This machine can be equipped
with a coin / token box. *
Where the machine is installed in a
washer-dryer stack a wall bracket is re-
quired for the coin mechanism. (The
coin mechanism is supplied with instal-
lation instructions and wiring diagram).
This machine can also be connected to
an already existing time counter. A spe-
cial connection cable * is required for
this. The re-programming of the ma-
chine then required must only be car-
ried out by a Miele Service Dealer.
The machine must not be used in con-
junction with equipment designed to
automatically switch the machine off,
(e.g. Timer switches).
All items marked * can be purchased
from the Miele Commercial Sales or
Spare Parts Department.
Installation
37
Hide quick links:
Advertisement
Table of Contents
