Table of Contents
Advertisement
Important: the appliance must be
properly installed and connected to
the water and electricity supply ac-
cording to local and national regula-
tions.
Check that the transit fitting at the
rear has been removed.
For further information read the instruc-
tions on pages 35-43.
Washing out the machine
Any residual lubricants and water from
testing still in the machine should be
flushed out as follows:
Do not load any laundry in the ma-
chine.
Add a little detergent to compart-
ment j.
Turn the programme selector switch
A
to the "
" Cottons 60°C programme.
Press the Start h button.
Before using for the first time
Water hardness reminder
The amount of detergent will depend
on various factors including water hard-
ness. Your local water authority can ad-
vise on water hardness in your area.
The dial in the detergent box can be
set as a water hardness reminder (1-4,
see Chart p.14). Use the spatula (sup-
plied for opening the drain filter panel).
11
Hide quick links:
Advertisement
Table of Contents
