Table of Contents
Advertisement
Quick Links
User's Manual
EMX-DVI
Single & Dual Link DVI Extender w/ EDID Mgmt
Equalizes and Boosts DVI or HDMI video signals
Learns and Emulates EDID
USB Port for EDID Read & Write
Can Disable HDCP Support
CUSTOMER
Order toll-free in the U.S. 800-959-6439
SUPPORT
FREE technical support, Call 714-641-6607 or fax 714-641-6698
UMA1185 Rev B
INFORMATION
Mail order: Hall Research, 1163 Warner Ave., Tustin, CA 92780
Web site: www.hallresearch.com
E-mail: info@ hallresearch.com
Advertisement
Table of Contents
Related Manuals for HR EMX-DVI
Summary of Contents for HR EMX-DVI
- Page 1 User’s Manual EMX-DVI Single & Dual Link DVI Extender w/ EDID Mgmt Equalizes and Boosts DVI or HDMI video signals Learns and Emulates EDID USB Port for EDID Read & Write Can Disable HDCP Support CUSTOMER Order toll-free in the U.S. 800-959-6439...
- Page 3 The DDC channel (that handles EDID and HDCP data) can either be by-passed through the EMX-DVI (so the source “sees” the connected LCD), or it can be Emulated, whereby the EDID is supplied from internal memory and HDCP is turned off (forcing the source to send non-content protected video without HDCP).
-
Page 4: Installation
Though designed to drive long cables on its output, when used as an extender, it is best to place the EMX-DVI at the end of the long cable. In that way its automatic equalizer can clean the signal and open the TMDS “eye”... -
Page 5: Top View
EMX-DVI Extender & EDID Mgr Video Input End Top View Video Output End © Copyright 2012. Hall Research, Inc. All rights reserved. -
Page 6: Default Emulation Resolutions
USB connector or from Pin 14 (+5 V) of the DVI connector. To power the EMX-DVI from the DVI input power, the source must be able to supply a minimum of 120 mA (@ 5 vDC) for SINGLE LINK DVI operation and a minimum of 220 mA (@ 5 vDC) for DUAL LINK DVI operation. -
Page 7: Windows Software Gui
If the factory defaults were successfully restored, ALL LED’s will illuminate one at a time in a circular pattern 5 times. 7.0 Windows Software GUI The EMX-DVI is controllable via a free Windows™ based GUI available from the Hall Research website. -
Page 8: Returning Unit For Repair
EMX-DVI Extender & EDID Mgr 9.0 Returning unit for Repair If you need to transport or ship your unit: Package it carefully. We recommend that you use the original container. Before you ship the units back to Hall Research for repair or return, contact us to get a Return Authorization (RMA) number. - Page 9 EMX-DVI Extender & EDID Mgr © Copyright 2012. Hall Research, Inc. All rights reserved.
- Page 10 EMX-DVI Extender & EDID Mgr © Copyright 2012. Hall Research, Inc. All rights reserved.
- Page 12 © Copyright 2012. Hall Research, Inc. All rights reserved.
Need help?
Do you have a question about the EMX-DVI and is the answer not in the manual?
Questions and answers