Hot Keys For System Control - Compal JHL90 Service Manual

JHL90 Service Manual

12.4 Hot keys for system control

• Definitions
All Fn Key will support Sticky key mode.
Function
Fn + Esc
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn+F5
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
After rebooting, pad lock is set to off and Num lock is also too. In this state, the
embedded cursor/number pad is not enabled on the notebook keyboard.
When the embedded keypad is on, holding down Fn will turn the embedded
keypad off.
Note 1: All hot key should be release Fn key after release F1~F12, and should be
press Fn+ (F1~F12) at the same time then function will work properly.
Note 2: About Fn+F2 will turn on/off wireless/Bluetooth which existence
device(s) (The detection by System BIOS).
Note 3: About Fn+F2 functions need AP for function propriety.
12.4.1 Kill switch relationship with Wireless LAN and Bluetooth
The following is two state of kill switch
1. Kill switch On:
When users press Fn+F2, AP will be showed. At this time, User can turn
on/off which Wireless LAN and Bluetooth.
If the devices just only have one whatever Wireless LAN or Bluetooth, the
AP won't be showed anything.
2. Kill switch Off:
2-28
Description
None
Enters S3 sleep state
Wireless/Bluetooth Turn on/off
LCD/CRT/LCD+CRT Switch
Brightness down
Brightness up
Mute
Volume Down
Volume Up
Media Play/Pause
Media Stop
Media Play Backward
Media Play Forward