Manual Tuning - Toshiba 65L9400U User Manual

Antenna Amplifier
Set this if the broadcast waves received are too weak or strong and the
picture is difficult to see. When this is set to On, the received broadcast
waves will be amplified.
1 Press the MENU button.
2 Select Installation > Channel Tuning > Antenna Amplifier, and
then press the OK button.
3 Press the p / q (arrow) buttons to select DTV or ATV.
To configure the settings for digital broadcasts select DTV.
To configure the settings for analog broadcasts select ATV.
4 Press the p / q (arrow) buttons to select On or Off.

Manual Tuning

After storing channels in memory, you can manually enter channels if the
channel number is known.
1 Press the MENU button.
2 Select Installation > Channel Tuning > Manual Tuning, and then
press the OK button.
3
Use buttons 0–9 on the remote control to enter the channel number
(for example, 56).
4 Press the OK button to begin Manual Tuning.
The channels found are listed at the bottom of the screen.
Option:
ATV
DTV
Storing channels in memory (optional)
Description:
Analog channel
Digital channel
Setting up your TV
75