140
Advanced features
Using the Flip Bar features
Using the Flip Bar features
The Flip Bar function adds thumbnails of programs currently being
broadcast for set channels, the channel being watched at the same time
the previous day, or the channel being watched at the same time one week
previously to the bottom of the screen, making it easy for you to choose a
channel. Up to 10 thumbnails can be displayed.
Thumbnails can be displayed at the bottom of the screen for the following
types of channels.
• Favorite Channels: Channels set as Favorite Channels.
• Yesterday*: The channel being watched at the same time the previous
day.
• Last Week*: The channel being watched at the same time one week
previously.
* Starting with the channel being watched at the same time, up to
10 thumbnails can be displayed for channels watched afterward,
measured at intervals of 30 minutes. A channel must have been
watched for at least 2 minutes to be included.
NOTE
Setting up the Flip Bar
Set up the Flip Bar before use. Channels from devices connected through
IR Blaster, and DTV or cable TV channels can be registered.
1
Press the MENU button.
2
Select Options > Flip Bar Setup and press the OK button.
Time information is required for the Flip Bar. Time information is
❖
received through a network connection or digital broadcast signals.
A network connection is recommended for correctly receiving time
information.
When receiving time information through digital broadcast signals, it
is required to set the channel to receive time information in the Flip
Bar Wizard and select this channel each time the TV is turned on.
If time information is not being received correctly, records of
❖
previously watched channels may not be stored properly.
The records of previously watched channels may be erased.
❖
When Auto Tuning is performed, the record of previously watched
❖
channels is erased.
An "ULTRA HD 4K" icon appears in thumbnails for channels using 4K
❖
picture signals.