8
IR Blaster
Select Next or Skip.
To start the IR Blaster setup, select Next on the screen, or to
❖
skip the setup, select Skip. If you skip this setup, you can setup
the IR Blaster at any time through the Installation > IR Blaster
Setup menu.
NOTE
The IR Blaster may not work with some devices, and it may not control
certain features on your external devices.
Setting the IR Blaster
IR Blaster Setup
1
Select Add on the screen.
Device Type screen will appear.
Device Type
1
Select Device Type, and use the t / u (arrow) buttons to select
a device type from the following:
2
Press the q button then press the GREEN button.
The Brand screen will appear.
3
Use the p / q (arrow) buttons to select the brand name then
press the OK button.
4
Press the OK button.
Model Name screen will appear.
Cable Box
❖
Satellite Box
❖
VCR
❖
Blu-ray, DVD Player
❖
Receiver, Misc Audio
❖
Amplifier
❖
CD Player
❖
Video Accessory
❖
Select a field and press the OK button to show the
❖
software keyboard. Enter the first few characters of the
brand name and press the GREEN button. The brand
name starting with the entered characters will appear on
the Brand screen.
Initial Setup and Menu
Performing the initial setup
65