Advertisement
LEFT
1' 1'
o o
( D ( D
( , "
8 S
O P
E 8
9 J ( ' |
6 +
R 8
5
Tubes on Phono PC board FIG. 2: For MC mode, make sure that the
12AX7A China tubes are installed in sockets \r1 and V101.
Jumpers on RCA Input PC board FIG. 2A: there are two sets of jumpers for
configuring the phono board to MC. Please change the connectors on the two
configuranon boxes and put the jumpers across pins 3 and tl and pins 9 and 10
respectively. Repeat this process for both left and nght channel.
Connect this shunt jumper across both
pins of the header for MC Operation
.tt,Z-
Jumpers on RCA PCB
F I G . 2 A
For MC move these
jumpers to pins 3&4
and pi ns 9& 10
fr #il;Axz:'r.(11;
,,
T}H 1:';--;
tlzATTt -='
r a ' - - " ' a l l f - } . B
*\r2':+::
FIG.2
4. Replace the cover
Put the cover of the preamplifier back onto the unit, and insert and tighten all
1.6 screws.
Tt5.5 Pramplifler
Owne/s tanual
vTt
,15
Advertisement
