Samsung SCO-2081R User Manual page 24

Setup
SPECIAL
1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the Function
switch so that the arrow indicates 'SPECIAL'.
2. Select a desir
switch.

IMAGE ADJ
1) When the SPECIAL menu screen is displayed,
select 'IMAGE ADJ' by using the Function Setup
switch so that the arrow indicates 'IMAGE ADJ'.
2) Select a desired mode using the Function Setup
switch.
-
Monitor : Please change the settings value of
video appropriate to your monitor.
LCD: Please select this menu item when using

an LCD monitor. You can change the gamma,
PED level and color gain in the sub menus.

USER : Please use this menu item when using
a monitor other than standard ones. You can
change the gamma, PED level and color gain in the sub menus.
-
REVERSE : You can reverse the picture.

OFF : You don't reverse the picture.
H-REV : You can flip the picture horizontally on the screen.

-
SHARPNESS : As you increase this value, the
picture outline becomes stronger and clearer.
Adjust this value appropriately depending on the
sharpness of the picture.

OFF: Turn off Sharpness function.
ON : The higher the level is,the sharper and

clearer the outline of the image becomes.
ER (Enhanced Resolution) : Choosing this mode can increase the sharpness of the picture

24_ Setup
ed mode using the Function Setup
under the colour mode.
1.
2.
3.
4.
5.
6. COAX
7. SSDR
8.COMM ADJ
9.RETURN
IMAGE SETUP
1.
2.
3.
4.
5.
LCD MONITOR
GAMMA
1.
2. PED LEVEL
IIIIIIIII IIIIIIIIIIII
3. COLOR GAIN
RESET
4.
Press SET to Return
LEVEL

Press SET to Return
Setup
LCD
0.55
34
7
7